Accessories

The Bulkhead Adjustable Bracket is specifically designed for mounting Bulkhead LED Luminaire to a surface or a variety of circular poles with a secure adjustment in 15° increments.

The Bulkhead Pole Mounting Bracket is specifically designed for mounting Bulkhead luminaire on a variety of circular poles that are widely used in the industry.

The Bulkhead Stainless Steel Light Shield is designed to reduce vertical light pollution.

The Bulkhead Wire Mesh Guard has been designed to add an extra layer of protection from potential accidents/vandalism while minimising interference with light output.

Enclosure and luminiare wall mount bracket.

The smooth bend of the Pole Top Adapter to a Spigot allows stiff reinforced power cable to be easily pushed through. For greater versatility, the adapter can fit both NB40 and NB50 industrial poles.

Surface Mount Spigot, Hot Dip Galvanized. Ideal for bolting to any ceiling or beam with a variety of holes or slots to provide bolting options. 33mm spigot suitable for all Coolon spigot mount luminaires.

The T-Bolt Swivel Bracket allows the IBYS-160 and AZIZ LIGHT™ high bay luminaires to be installed on angled surfaces between 0 and 45°.

Allows for convenient mains in-out connection at the luminaire without modifying the luminaire.

The U-Bolt Pole Mount allows a variety of surface mounted products to be installed on industrial poles, pipes and handrails of various diameters.

The U-Bolt Pole Mounting Clamp Kit is specifically designed for mounting products with a flat mounting surface on a variety of circular poles that are widely used in the industry.

The U-Bolt pole mounting kit is specifically designed for mounting products using AL036 enclosure on a variety of poles that are widely used in the industry.

U-Bolt Pole Mounting Spigot Kit, Hot Dip Galvanized. Suitable for clamping to pipes 33 to 90mm OD. 33mm spigot suitable for all Coolon spigot mount luminaires.

Allows for convenient mains in-out connection at the luminaire without modifying the luminaire.

Adaptor Plate, to match Versalux EBH and Coolon Bulkhead, 3mm SS 304 #4.

The Wall Mounting Bracket to a Spigot allows spigot mounted lights to be easily installed on any flat surface.

The Beam Coupling Plate is used to provide structural integrity along the length of the XBLADE™ 960 mounting bracket in applications where the entire bracket cannot be fastened to a surface.

Eliminate spikes / transients when connecting multiple luminaires to a single DC supply line.