ExDLK

conveyors_and_tunnels open_areas emergency workshops_and_Warehouses pits_and_crushers lighting_Tower

Lumen Output: 2500 – 6800 lm

Power: 60W

The ExDLK is designed to provide the most energy efficient way of illuminating industrial conveyors and walkways, capable of delivering the required minimum of 40 lux with an average of 80 lux, when spaced as far as 12m apart with a typical installation height of 2.4m and a 5 degree tilt. The typical power consumption of less than 62W converts into a mere 5W per linear meter of conveyor line (White LEDs version). Raising the bar of performance and efficiency for industrial conveyor and walkway lighting.

Download ExDLK Specification Sheet (PDF)

Key Features
Product Benefits
Specifications
Downloads
Gallery
Related Products

Características Principales
Beneficios del Producto
Especificaciones
Descargas
Galería
Productos Relacionados

Push the light further than ever before

The ExDLK is designed to achieve a uniform quality of light, without dropping below 40 lux over the 12 metre area.

Solid body design

Unlike conventional conveyor lights ExDLK was designed to withstand constant abuse.

Resistant to Vibration

Impact/Shock Proof

Chemical Resistance

High Pressure Washable

Unaffected by Severe Temperature Variations

Product Benefits

Cool surface temperature

Solid state luminaires are designed to dissipate the heat generated by the LEDs. Due to this, the LED fittings have a much lower surface temperature than traditional HID equivalents.

More information

Instant ON/OFF

LEDs do not require warm up. Instant on to 100% output translates to no downtime, improved safety and the ability to utilize sensor switching to significantly save energy.

More information

No flickering

High Quality white light without stroboscopic flickering.

More information

High IP rating - IP66

This product is high pressure washable.

More information

Low Susceptibility to Vibration

This luminaire is designed to handle continuous exposure to vibration.

More information

LONG useful operating LIFE (L70)

This luminaire’s life is rated at 50,000 hours to 70% residual light output.

More information

3 years full/solid Warranty

All Coolon Industrial Products are backed by a Solid 3 Year Manufacturer’s Warranty.

More information

Proudly Made In Australia

Coolon products are proudly designed and manufactured in Australia.

More information

Specifications

Make/Model
Model	ExDLK
Optical Characteristics
Luminous Flux (Photometered)	CWT 6300 – 6800 lm WWT 2500 – 4000 lm

CCT	CWT 5000 – 7500K AMB 1800 – 2700K WWT 2700 – 3500K NWT 3500 – 5000K

CRI	>70 excluding amber
Electrical Characteristics (Luminaire)
Power Consumption	62W Typical

Nominal Voltage	230VAC

Voltage Range	90 – 305VAC, 127 – 431VDC

Cable Type	Orange Circular 2.5 mm² 3 Core

Cable Diameter	10 – 12mm

Cable Length	3m

Frequency Range	47 – 63Hz

Power Factor	>0.95 / 230VAC

Leakage	<0.75mA / 277VAC
Environmental
IP Rating	IP66

Impact Rating	IK09

Salt Spray Tested	Yes

Operating Temp. Range	-20 to 50°C

Thermal Management Type	Active/Continuous

Expected Lifespan	50,000 Hours to 70% Brightness

Material Composition (Body)	LM6 Aluminium Alloy (<0.1% copper content)

Material Composition (Optics)	PC LEV1700

Material Composition (Cover)	Polycarbonate

Mounting/Bracket Type	U-Bolt Spigot Mount OD 32 – 35mm

Compliance (Safety Standards)
AS/NZS60598.1	Luminaires General Requirements and Tests

AS/NZS 60598.2.1	Luminaires Particular requirements Fixed general purpose luminaires

IEC 60079-0 : 2011 Edition: 6.0	Explosive atmospheres Part 0: General requirements

IEC 60079-31 : 2013 Edition: 2	Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure “t”
Compliance (EMC)
AS/NZS CISPR15	Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Explosion Protection
Dust

Certificate Number	IECEx TRA 15.0001X

Protection	Ex tb IIIC T65°C Db
Weight/Packaging
Luminaire Weight	5.25kg

Packaging Dimensions	460 x 440 x 180mm

Packaged Weight	6.6kg
Warranty
Warranty	3 years warranty as standard 5 years extended warranty optional