Controllers and Power Supplies - Outdoor Single Output Switching Power Supply Specifications

Lighting Solutions > Controllers and Power Supplies

Outdoor Single Output Switching Power Supply Specifications

Model	CLG-100-12	CLG-100-15	CLG-100-20	CLG-100-24	CLG-100-27	CLG-100-36	CLG-100-48
DC Voltage	12V	15V	20V	24V	27V	36V	48V
Rated Current (Note 6)	40A	30A	18A	15A	10A	8A	5A
Current Range (Note 6)	0 ~ 5A	0 ~ 5A	0 ~ 4.8A	0 ~ 4A	0 ~ 3.55A	0 ~ 2.65A	0 ~ 2A
Rated Power (Note 6)	60W	75W	96W	96W	95.85W	95.4W	96W
Ripple & Noise (max.) (Note 2)	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	200mVp-p
Voltage Adj. Range	Fixed. Can be modified between 0% ~ -15% rated output voltage
Current Adj. Range	Fixed. Can be modified between 3% ~ -25% rated output current
Voltage Tolerenace (Note 3)	±3.0%	±3.0%	±3.0%	±3.0%	±3.0%	±2.0%	±2.0%
Line Regulation	±1.0%
Load Regulation	±2.0%
Setup, Rise Time	1200ms, 80ms / 230VAC 1200ms, 80ms / 11VAC at full load
Hold Time (Typ.)	60ms / 230VAC 30ms / 115VAC at full load
Voltage Range (Note 5)	90 ~ 264VAC
Frequency Range	47 ~ 63Hz
Power Factor	PF>0.95/230VAC PF>0.98/115VAC at full load
Efficiency (Typ.)	83%	85%	87%	87%	87%	87%	87%
AC Current	12V:0.8A/115VAC 0.4A/230VAC 15V:0.9A/115VAC 0.45/230VAC 20V ~ 48V:1.1A/115VAC 0.55A/230VAC
In Rush Current (Max.)	COLD START 40A/230VAC
Leakage Current	0.5mA/240VAC
Over Current (Note 4)	95 ~ 100%
	Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	13 ~ 16V	16.5 ~ 20V	22 ~ 27V	27 ~ 34V	29 ~ 36V	39 ~ 48V	52 ~ 64V
	Protection type : Shut down and latch of o/p voltage, re-power on to recover
Over Temperature	90°C±10°C (RTH2)
	Protection type : Shut down and latch of o/p voltage, re-power on to recover
Working Temp.	-30°C ~ +70°C (Refer to output load derating curve), -40°C possible
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp. Humidity	-40 ~ +80°C , 10 ~ 95% RH
Temp. Coefficient	±0.03%/°C (0 ~ 50°C)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety Standards	UL1310 Class 2, TUV EN60950-1, CAN/CSA C22.2 No. 223-M91(except for 48V), IP67 Approved
Withstand Voltage	I/P-O/P:4.25KVDC
Isolation Resistance	I/P-O/P:100M Ohms/500VDC
EMI Conduction & Radiation	Compliance to EN55022 (CISPR22) Class B
Harmonic Current	Compliance to EN61000-3-2,-3
EMS Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, ENV55024, Light industry level, criteria A
MTBF	301K hrs min. MIL-HDBK-217F (25°C)
Dimension	2226839mm (LWH)
Packing	1.0Kg; 12pcs/13Kg/0.49CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to OLP characteristics. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. This is the maximum possible output current and power, overload protection may be activated slightly below this level to comply with the requirement of UL1310 class 2. 7. 3 years warranty is guaranteed for operating ambient temperature no higher than 68°C.

Click here to go back