Home > Products > Industrial LED Lighting > Static RETROLED Industrial LED Luminaire

Static RETROLED Industrial LED Luminaire

Designed with unsurpassed reliability in mind, Coolon’s RETROLED luminaire is suitable for use in mining and other industrial environment where reliability is required under any conditions including heavy vibrations.

Offering many benefits over conventional gas discharge lighting technologies RETROLED luminaire is an ideal replacement for commonly found area lighting luminaires along many industrial walkways, tunnels and passageways.

Convenient mount allows for protected cable entry into the luminaire. Luminaire is supplied with 2 meters orange circular mains cable fitted.

Low surface operating temperature makes device safe to touch and allows it to be used in applications where the use of superheated gas discharge or halogen globes present a risk of hazard.

High redundancy level and insensitivity to switch on and off cycles makes RETROLED luminaire suitable for power managed applications.

High CRI of emitted light provides natural appearance for the environment, increasing safety.

Stable, flicker free operation removes any danger of undesirable and sometimes dangerous stroboscopic effects.

Comparison of Coolon Static RetroLED to Philips Metro 70HPS on Conveyor Walkway. View PDF

Applications

Heavy vibration areas
Conveyor lighting
General mining lighting
Foot path and access ways
Security lighting
Road lighting

Specifications

Luminaire:

Luminous Flux: 3500 - 5500 lm
Power Consumption: 80W Max
Power Supply(Built In): 24VDC 100W
Inrush Current: Cold Start 40A/230VAC
Current Consumption: 0.55A/230VAC
Operating Voltage Range: 90-295VAC,127-417VDC
Frequency Range: 47-63Hz
Leakage Current: <0.75mA/240VAC
IP Rating: IP66
Power Factor: >0.95
Weight: 6.9kg
Body: 304 Stainless Steel

Light Module:

LED Efficacy: Up to 90lm/w @ 25ºC
Max. Operating Voltage: 26VDC
Min. Operating Voltage: 23VDC
Body: Aluminium Alloy* (Marine Grade Black Anodized)
*Composition available on request

Ordering Information

Product Gallery

Product Downloads

Static RETROLED Brochure
Download Adobe PDF Format (590kb).
To download, right click link and choose " Save As".

Static RETROLED Manual
Download Adobe PDF Format (411kb).
To download, right click link and choose " Save As".

Static RETROLED Mounting Specifications
Download Adobe PDF Format (105kb).
To download, right click link and choose " Save As".

Degree of protection against solid foreign objects		Degree of protection against water
Non-protected	0	0	Non-protected
The object probe, sphere of 50mm diameter shall not fully penetrate (Protected against solid foreign objects of 50mm diameter and greater)	1	1	Vertically falling drops shall have no harmful effects. (Protected against vertically falling water drops)
The object probe, sphere of 12,5mm diameter shall not fully penetrate. (Protected against solid foreign objects of 12,5mm diameter and greater.)	2	2	Vertically falling drops shall have no harmful effects when the enclosure is tilled at any angle up to 15° on either side of the vertical. (Protected against vertically falling water drops when enclosure tilted up to 15°)
The object probe of 2,5mm diameter shall not penetrate at all. (Protected against solid foreign objects of 2,5mm diameter and greater)	3	3	Water sprayed at an angle up to 60° on either side of the vertical shall have no harmful effects. (Protected against spraying water)
The object probe of 1,0mm diameter shall not penetrate at all. (Protected against solid foreign objects of 1,0mm diameter and greater)	4	4	Water splashed against the enclosure from any direction shall have no harmful effects. (Protected against splashing water)
Ingress of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety. (Dust-protected)	5	5	Water projected in jets against the enclosure from any direction shall have no harmful effects. (Protected against water jets)
No ingress of dust. (Dust tight)	6	6	Water projected in powe7rful jets against the enclosure from any direction shall have no harmful effects. (Protected against powerful water jets)
		7	Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time. (Protected against the effects of temporary immersion in water)
		8	Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. (Protected against the effects of continuous immersion in water)