Controllers and Power Supplies - 100W Power Supply Specifications

Architectural LED Power Supplies and Controllers

Home > Products > Commercial LED Lighting > Controllers and Power Supplies > 100W Power Supply

100W Power Supply Specifications

Model	S-100-3	S-100-5	S-100-7.5	S-100-10	S-100-12	S-100-15	S-100-18	S-100-24	S-100-27	S-100-48
DC Voltage	3V	5V	7.5V	10V	12V	15V	18V	27V	27V	48V
Rated Current	20A	20A	13.6A	10A	8.5A	6.7A	5.6A	4.5A	3.7A	2A
Current Range	0 ~ 20A	0 ~ 20A	0 ~ 13.6A	0 ~ 10A	0 ~ 8.5A	0 ~ 6.7A	0 ~ 5.6A	0 ~ 4.5A	0 ~ 3.7A	0 ~ 2A
Rated Power	60W	100W	102W	100W	102W	100.5W	100.8W	108W	99.9W	96W
Ripple & Noise (max.)	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p
Voltage Adj. Range	2.85 ~ 3.3V	4.75 ~ 5.5V	6.75~8.25V	9 ~ 11V	10.8~13.2V	13.5~16.5V	16.2~19.8V	21.6~26.4V	26 ~ 32V	43.2~52.8V
Voltage Tolerenace	±2.0%	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.3%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%	±0.2%
Load Regulation	±0.5%	±0.5%	±0.5%	±0.3%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%	±0.2%
Setup, Rise Time	200ms, 80ms at full load
Hold Time	20ms at full load
Voltage Range	85 ~ 132VAC/180 ~ 264VAC selected by switch 255 ~ 370VDC
Frequency Range	47 ~ 63Hz
Efficiency (Typ.)	70%	78%	80%	80%	81%	81%	82%	84%	84%	84%
AC Current (Typ.)	2.4A/115VAC 1.2A/230VAC
In Rush Current (Max.)	COLD START 30A/115VAC 60A/230VAC
Leakage Current	<1mA / 240VAC
Over load	105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only)
	Protection type : Shut down o/p voltage, re-power on to recover
Working Temp.	-10 ~ +60°C (Refer to output load derating curve)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp. Humidity	-20 ~ +85°C , 10 ~ 95% RH
Temp. Coefficient	±0.03%/°C (0 ~ 50°C)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety Standards	Design refer to UL1012
Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI Conduction & Radiation	Design refer to FCC Part15 J Conduction Class B
MTBF	322.4K hrs min. MIL-HDBK-217F (25°C)
Dimension	1999838mm (LWH)
Packing	0.8Kg; 16pcs/13.8Kg/0.95CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.

Click here to go back