Outdoor 300W Power Supply

• Model
• DC Voltage
• Rated Current
• Current Range
• Rated Power
• Ripple & Noise (max.)
• Voltage Adj. Range
• Efficiency (Typ.)
• Over Voltage

• PWR-CLN-USP350-12
• 12V
• 29.2A
• 0 ~ 25A
• 300W
• 100mVp-p
• 10.8 ~ 13.2V
• 88%
• 13.5 ~ 16.3V

• PWR-CLN-USP350-15
• 15V
• 23.4A
• 0 ~ 20A
• 300W
• 100mVp-p
• 13.5 ~ 16.5V
• 88%
• 17 ~ 21V

• Model
• DC Voltage
• Rated Current
• Current Range
• Rated Power
• Ripple & Noise (max.)
• Voltage Adj. Range
• Efficiency (Typ.)
• Over Voltage

• PWR-CLN-USP350-24
• 24V
• 14.6A
• 0 ~ 12.5A
• 300W
• 150mVp-p
• 21.6 ~ 26.4V
• 88%
• 26.7 ~ 32.4V

• PWR-CLN-USP350-48
• 48V
• 7.3A
• 0 ~ 6.25A
• 300W
• 150mVp-p
• 43.2 ~ 52.8V
• 89%
• 89%

• Voltage Tolerance
• Line Regulation
• Load Regulation
• Setup, Rise Time
• Hold Time (Typ.)
• Voltage Range
• Frequency Range
• Power Factor
• AC Current
• In Rush Current (Max.)
• Leakage Current
• Over Current
• Over Temperature
• Working Temp.
• Working Humidity
• Storage Temp. Humidity
• Temp. Coefficient
• Vibration
• Safety Standards
• Withstand Voltage
• Isolation Resistance
• EMI Conduction & Radiation
• Harmonic Current
• EMS Immunity
• MTBF
• Dimension
• IP Rating
• Packing

• ±2.0%
• ±0.5%
• ±1.0%
• 2000ms, 100ms/230VAC 4000ms, 100ms/115VAC at full load
• 16ms/230VAC 16ms/115VAC at full load
• 90 ~ 264VAC 127 ~ 370VDC
• 47 ~ 63Hz
• 0.95/230VAC, 0.98/115VAC at full load
• 4A/115VAC 2A/230VAC
• 22A/115VAC 44A/230VAC
• <2mA / 240VAC
• 105 ~ 130% rated output power
• 80°C±5°C (TSW1) detect on heatsink of power transistor, 80°C±5°C (TSW2 ) detect on heatsink of power diode
• -10°C ~ +65°C (Refer to output load derating curve)
• 20 ~ 90% RH non-condensing
• -40 ~ +85°C , 10 ~ 95% RH
• ±0.03%/°C (0 ~ 45°C)
• 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
• UL60950-1, TUV EN60950-1 approved
• I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
• I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
• Compliance to EN55015, EN55022 (CISPR22) Class B
• Compliance to EN61000-3-2,-3
• Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A
• 106.3K hrs min. MIL-HDBK-217F (25°C)
• 235.2*101.5*38mm (L*W*H
• IP66
• 1.3Kg; 12pcs/16.6Kg/0.74CUFT(HLG-240-Blank/A/B) 1.23Kg; 12pcs/15.8Kg/1.16CUFT(HLG-240-C)

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

Derating Curve